2020-07-08 18:57:54 1043
Machine wear is normal, but if your improper use causes severe machine wear, it is not worth it. Only by using the sand blower correctly can you better serve you and build wealth for you for a longer time. Then use the sand blower What are the precautions at the time? Gold Mine will introduce to you
1 In the sand-blasting mobile, because the sand-blasting equipment is high-speed equipment, special attention should be paid to safety Production. Relevant personnel should stay away from the sand blower equipment. If the machine needs to be repaired, it should be carried out after shutdown.
2 The sand blower uses Mobil car grease or 3 lithium base grease, every 400 hours of work Add a proper amount of grease, and open the spindle assembly to clean the bearings after 2000 hours of work. The sand blower generally works for 7200 hours and replace the new bearings. The upper bearing of the spindle assembly is the moving end, and the lower bearing is the fixed end. After assembly, Pull the pulley should rotate flexibly.
3 It should be shut down regularly and the observation door should be opened to observe the internal wear of the sand blower, the center inlet pipe cone cap impeller upper and lower runner lining peripheral guard plate wear block and other components After the components of the sand blower are worn out, they should be replaced or repaired in time. When replacing the wear blocks, they should be replaced at the same time to ensure that the weight of the wear blocks is the same. It is strictly forbidden to open the observation door to observe the internal working conditions during the operation of the sand blower. , So as to avoid accidents. If you find that the impeller body of the sand blower is worn, please contact us for repair in time.
The sand blower is a kind of crusher. The sand blower professionally produced by Gold Mine is widely used in industry. Sand blasting can meet the various crushing needs of users. Welcome to buy