Article

  1. Home
  2. article
  3. Some points of cone crusher are the goals and directions of our work

Some points of cone crusher are the goals and directions of our work

ren

Opal

2020-09-20 09:57:54 1116

Cone crushers need to pay attention to many issues in the use and development process. Specifically, we need to pay attention to some of the use of our cone crushers during use. These are very important. The use of our cone crushers determines the Stability, I hope we can do this according to our content below, and then finally achieve the effect we need

(1) The ore must be in the middle of the distribution tray It is not allowed to feed the ore directly into the crushing cavity. This prevents the crusher from overloading and uneven wear of the liner. The correct ore feeding condition is that the ore is evenly dispersed in the crushing cavity through the distribution plate, and the fed ore cannot It is higher than the level of the rolling mortar wall.
(2) The maximum feed size of the crusher is 85 to the size of the mine mouth, otherwise it will lead to a reduction in the output of the crusher and damage to some parts of the cone crusher.
(3) The crusher is not allowed to start under load, and the load start will definitely cause an accident.
(4) When stopping, the miner must be stopped first, and the ore that has entered the crushing cavity is crushed and discharged. The machine stops.
These points are very important to us. In many cases, some details determine success or failure, but no matter what we must pay attention to when using cone crushers, we must pay attention to these contents to make it develop. Better, we understand specifically to log in