Article

  1. Home
  2. article
  3. What are the solutions to the use of the impact crusher

What are the solutions to the use of the impact crusher

ren

Ethel

2020-09-18 00:57:54 1048

When the impact crusher is used, the blockage is also a problem we sometimes encounter. Then when we encounter these problems, how we need to solve it is a major problem, and sometimes it is not we solve it. The key We have to study a method to eliminate the roots, so that we can solve the problem fundamentally and finally achieve our goal.

1. Crusher blockage is continuous use of the crusher One of the common faults in the system may be a problem in the design of the organism itself, but it is more caused by improper use and operation.
2. The feeding speed is too fast and the load is increased, which is one of the reasons for the blockage. So everyone must pay attention when using the crusher. During the feeding process, pay attention to the problem of the large deflection angle of the ammeter pointer. If the rated current is exceeded, it indicates that the motor is overloaded, and the motor will be burned out for a long time. In this case, the feed door should be reduced or closed immediately, or the feeding method can be changed, and the feeding amount can be controlled by adding the feeder. The feeder has two types of manual and automatic. The user should choose the appropriate feeder according to the actual situation. .
These are some of the problems related to clogging in the use of impact crushers. When we use impact crushers, these are the places we need to learn, and ultimately achieve our economic development, our personal enterprise All have certain benefits, which not only develops the national economy, but also improves the status of our impact crusher in the crusher industry. Source of the article

ren

Beverly

2020-09-18 03:57:54 1000

When the impact crusher is used, the blockage is also a problem we sometimes encounter. Then when we encounter these problems, how we need to solve it is a major problem, and sometimes it is not we solve it. The key We have to study a method to eliminate the roots so that we can solve the problem fundamentally and finally achieve our goal.

1. One of the common failures in the continuous use of the crusher may be a problem in the design of the organism itself, but it is more caused by improper use and operation.
2. The feed speed is too fast and the load increases, which causes blockage. One of the reasons. So everyone must pay attention when using the crusher. During the feeding process, you must always pay attention to the problem of the large deflection angle of the ammeter pointer. If it exceeds the rated current, it indicates that the motor is overloaded, and it will burn out for a long time. Motor. In this case, you should immediately reduce or close the feed door, or you can change the feeding method, and control the feed amount by adding the feeder. The feeder has manual and automatic two types, and the user should choose the appropriate one according to the actual situation The feeder.
These are some of the problems related to clogging in the use of impact crushers. When we use impact crushers, these are all things we need to learn, and ultimately achieve our economic development. Our personal businesses have certain benefits, which not only develops the national economy, but also improves the position of our impact crusher in the crusher industry. Source of the article